Slave control
ENABLED_0 | Peripheral group, slave 0 enable. This field is for the peripheral group internal MMIO register slave (PPU structures) and is a constant ‘1’. This slave can NOT be disabled. |
ENABLED_1 | Peripheral group, slave 1 enable. If the slave is disabled, its clock is gated off (constant ‘0’) and its resets are activated. Note: For peripheral group 0 (the peripheral interconnect MMIO registers), this field is a constant ‘1’ (SW: R): the slave can NOT be disabled. |
ENABLED_2 | Peripheral group, slave 2 enable. If the slave is disabled, its clock is gated off (constant ‘0’) and its resets are activated. Note: For peripheral group 0 (the peripheral interconnect, master interface MMIO registers), this field is a constant ‘1’ (SW: R): the slave can NOT be disabled. |
ENABLED_3 | N/A |
ENABLED_4 | N/A |
ENABLED_5 | N/A |
ENABLED_6 | N/A |
ENABLED_7 | N/A |
ENABLED_8 | N/A |
ENABLED_9 | N/A |
ENABLED_10 | N/A |
ENABLED_11 | N/A |
ENABLED_12 | N/A |
ENABLED_13 | N/A |
ENABLED_14 | N/A |
ENABLED_15 | N/A |